How To Increase The Value Of Aluminum Fence

27.07.15 / custom aluminum fabrication / Author: / Comments Off
Tags: , ,

Aluminum parts are economical, lightweight and attractive. Member made from the metal often cheaper, because they can be processed than many other metals, such as steel, less time, and does not require additional finishing. As a pure metal is soft, add a small amount of copper, magnesium, zinc and other elements of strength. It is resistant to corrosion when exposed to the atmosphere, thus preventing rust surface forming a thin protective layer.Custom aluminum fabrication is chemically resistant, easy processing, and has a high strength to weight ratio – it weighs about one-third as much as steel. This is also a good conductor of electricity and heat, making it an ideal heat sink, and reflects heat and light, is nonmagnetic and ductile.

When outsourcing aluminum fences, settle for products manufactured in automated state-of-the-art facilities where the product defects and inconsistencies are eliminated. Even the minor components used must be of top quality metal. Fences are stringently checked for quality as well as dimensional and wall size tolerances.

Aluminum fences have some clear advantages over other types of fences -

鈥 Aluminum does not rust as it is a non-ferric metal.
鈥 Low maintenance as aluminum need not be painted every few years.
鈥 Aluminum fences look great on any kind of landscape.
鈥 These cost less than traditional wrought iron.

However, for getting aluminum fences that really add value to your property, you need to make sure you get these from manufacturers of repute, who make fences in automated state-of-the-art facility, that removes product defects and inconsistencies. Such manufacturers have complete fencing system offering multiple standard design styles for varying applications.

High-strength fences go through a multi-stage process where these are cleaned, pretreated, powder coated and rigorously tested to affirm that they meet the top standards of quality. Even the screws and fasteners in these fences are of high quality steel. Other ingredients like nylon patches which prevent screws from backing out and the paint are also high quality. Paint they apply is specifically formulated for harsh exterior applications.

Moreover, reliable manufacturers will be willing to back the fences with a lifetime warranty which will usually include defects in workmanship and peeling, cracking or blistering of powder coating. Manufacturers will pledge to repair, replace or refund the purchase price if the product fails to conform to warranty.

Aluminum fences are available in different grades and you must know which one suits the application.

Residential aluminum fences are constructed using a 5/8″ picket and 1″ Horizontal U Channel. These fences are suitable for swimming pools, perimeter fencing, and landscape fencing applications.

Light commercial fence is constructed using a 3/4″ picket and a 1″x 1-1/2″ Horizontal rail. It suits the applications where the fence is a vital component and necessary element in the design.

Series 1 industrial fences are made using a high strength 1″ picket and 1-5/8″ Horizontal U Channel. These are suitable for playgrounds, municipal buildings, office parks, townhouse complexes, public swimming pools and parks.

Series 2 industrial fences are constructed using a high strength 1″ picket and 1-3/4″ Horizontal U channel. These suit the applications for Series 1 fences but provide added structural security.

Top level aluminum fence manufacturers use components made of marine-grade alloys for better strength, durability and corrosion resistance. They also ensure that their own supplies of materials are stringently checked for quality as well as dimensional and wall size tolerances. Quality control is put in place for achieving performance parameters for impact resistance, abrasion resistance, chemical resistance, color uniformity and specular gloss. Deploying advanced procedures, effects like color retention, chalk resistance, erosion resistance and gloss retention are attained as well.

Fences made by seasoned companies are light weight, easy to install and repair. For instance, if a picket is damaged, you need to change only the particular picket. Serving as a one stop solution, they make sure that the clients get all kinds of aluminum fences they need. They also provide for custom fabrication, offering multiple standard design styles for varying applications. Fences are available in several standard and custom colors.

Related reading: Aluminum Solar Panel Frame Stainless Steel Fabrication

It Is Easy to Do Aluminum Recycling

14.07.15 / Aluminum Rectangular Tube Suppliers / Author: / Comments Off
Tags: , ,

If you currently do not recycle at your home or office, I hope this article will inspire you to change! Would you believe how easy it can be! A great place to start is the aluminum can recycling. Tanks in homes and offices throughout the country have found a common project, usually throws a day. This is unfortunate, because aluminum is a precious metal of our society and can be reused again and again. Read on to learn more about this interesting and useful metal, and how to start recycling aluminum cans today.Aluminum Rectangular Tube Suppliers 70% Off Free shipping, in stock.

Several types of cans are made from aluminum, like soup, vegetable, pet food, and soda cans. Over 80 billion cans are produced each year. These are bought in large quantities all over the nation, yet only 2/3 are recycled and repurposed. It is so simple, but thousands of Americans are accustomed to throwing garbage in the garbage. But aluminum cans are not trash, they are valuable treasure. They can be melted down, reprocessed, and repurposed over and over again. This saves an abundant amount of energy each year and reduces the need to mine raw Bauxite Ore. It even reduces air pollution!

Getting Started

If you want to join the initiative of preserving our Earth’s natural resources by recycling metal, start with aluminum since it is the most available and prevalent. Whether at home or the office, designate a separate receptacle or box for recyclable cans. Be sure to label it for aluminum only, or notify your family that the receptacle if for only aluminum. Once this area is assigned and labeled, it is a great help to pass out a flyer at work to further notify and promote the aluminum recycling initiative. Include where the receptacle is located and what days it is picked up.

As for home, start at the beginning of the month and collect all aluminum cans and items you use or find on a daily basis. Sodas, soup, foil, and more are all recyclable aluminum items. Collect these kinds of items throughout the entire month, then take your bulk collection to a local drop-off station or recycling company. Some even pay cash by the pound! One pound equals out to about 32 cans. The amount of money paid for aluminum cans depends on current market prices for metal. To be sure a can is made from aluminum, place a magnet on it. If it sticks, it is most likely steel. If it doesn’t stick, you’re in business!

Related reading: custom aluminum fabrication aluminum extrusion manufacturers

How to Find the Right Aluminum Extruder

30.06.15 / custom aluminum fabrication / Author: / Comments Off
Tags: , ,

Custom aluminum fabrication depends upon knowing the strengths of the metal as a material because that knowledge is important to the success of every project. Having the right tools to take those strengths and put them to good use is also one of the keys to custom aluminum fabrication. At National Metal Fabricators, we combine our technology and machinery with nearly 70 years of customer metal fabrication experience to deliver some of the most sophisticated aluminum fabrication services in the country.

From a manufacturing technology standpoint, the 2,000 watt, state-of-the art Cincinnati Laser Cutting Center in our 50,000 square foot facility at National Metal Fabricators provides the foundation for successful aluminum fabrication. Our machinery helps us solve sophisticated manufacturing challenges in working with aluminum.

If you are out to find the right aluminum extruder for your needs you must be careful. Aluminum extrusions in India are widely prevalent and there are several emerging enterprises offering aluminum extruded products. However, it is only through correct selection that you can get hold of the best aluminum supplier.

For this all you need is a little effort and adequate knowledge on aluminum extrusions India. Aluminum is a widely available metal found all over the world and in India as well. Not only since the metal is extensively obtainable, but also since it can be recycled again and again without the metal losing its form. Thus, several companies have for decades realized the true potential of aluminum extruded products and have put it to use. If you are in need of an aluminum extruder you must look for a manufacturer which is also a supplier.

It so happens that there is a myriad of aluminum extruder in India involved in the business for years. Again there are suppliers in the trade as well trading aluminum extruded products from manufacturers. It is wise to purchase from manufacturer of aluminum products directly rather making rounds at a suppliers office. Manufacturers can offer you the best price since they claim lesser profits than supplier. Then comes the tougher part, to select the best aluminum extruded products manufacturer and supplier in India. Since aluminum extrusions India is pretty popular today there are lists of big wigs in the business. In order to get more information, search through the particular requirement of product. For example if you need products for automobile industry you need a certain list of items, so search accordingly. Now, once you get the list of manufacturers, visit their website and look through their profile. Manufacturers with decades of experience have more knowledge on extruded aluminum. There offered aluminum fabrication services and extruded products.

Companies involved in aluminum extrusions in India have high-tech operating unit with cylinders and other requisites that help in production. Such information is generally offered at the website as well. You can have a loom at such information offer and decide judiciously. Price is another factor you must take care of. Almost every company offers a price of their own based on the package and manufacturing cost. Even though the price varies it is almost close. You can compare the prices of the major companies and even use a calculator to get the exact calculation done.

Generally, providers of aluminum extrusions in India also provide custom metal stamping, tube forming and aluminum fabrication services. So, if you are looking for a good aluminum extrusion services start with your search today. Go through all the possible details you can get your hands over. Browser through their respective websites and you can get good details on them. Or else you can discuss with buyers already gone through the experience of purchasing aluminum extruded products. So, get ready to look for companies involved with aluminum extrusions in India and purchase best quality aluminum extruded products.

Related reading: Aluminum Solar Panel Frame Aluminum Rectangular Tube Suppliers

Do You Know Aluminum Square Tubing?

15.06.15 / Aluminum Rectangular Tube Suppliers / Author: / Comments Off
Tags: , ,

You must agree that Aluminum tubes are extremely useful due to their light weigh and their corrosion resistance.I wanted to know how different materials are machined into one all-winning product.My interest in studying this aspect of aluminum tubes led me to,understand the machining and the flow-forming process.The machining and the flow-forming processes are used to make the best aluminum tubes.

Can you imagine a life without tubing or some kind or the other? Well look around you and you will realize that in today鈥檚 world it is well nigh impossible. There are so many things like electrical lighting, computers, garden landscaping etc and even the heavy machinery or aeronautics industry cannot run without tubing of some kind or the other. One misconception that people have when you mention the term tubing is that all tubing is round. However, this is not true as a lot of tubing is rectangular or square in shape. Such square and rectangular tubing is made from all kinds of materials in which we also find round tubing. Aluminum Square Tubing in particular is widely used in the industrial and domestic sector alike.Here is Aluminum Rectangular Tube Suppliers.

Bent tubing is a part of life

For instance the framework of your wicker chair could consist of aluminum tubing and it may also be square in shape. In fact wherever ease of operation and installation is required round tubing is forsaken and square or rectangular tubing used instead. This kind of tubing also provides more structural strength in some cases when compared to round tubing. Let us discuss the very interesting topic of tube bending. This is again a factor that we don鈥檛 pay attention to, but utilize widely in everyday life. For instance the bicycle rack lying in the garage is nothing but a loop of metal which has been worked on by benders. In order to achieve a smooth result without any kinks or defects, the bender needs to have a lot of skills and expertise.

Aluminum Square TubingBenefits of aluminum tubing

Aluminum square tubing bending is comparatively easier to achieve as compared to steel, carbon steel, copper, bronze cast iron etc. This is because aluminum is comparatively more malleable. In spite of that bending a length of aluminum tubing into any particular shape can be quite a challenging task. The best thing about aluminum is that it is a low maintenance and low cost material. Usually other metals have to be polished with chromium or zinc to prevent rusting and corrosion. However, this is not essential with aluminum tubing because aluminum does not rust or corrode easily. It is also quite immune to the elements, although if you keep a length of aluminum tubing soaked in water for a long time, there is bound to be damage. In spite of this aluminum is quite a feasible material to be used both indoors and outdoors.

Uses of tube bending

Aluminum square tubing and square and rectangular tubing made of other materials is often used in railing barriers along roadways and associated structures. When using the tubing sometimes it has to be bent or curved to follow the path of the roadway. Here again the work of the benders becomes quite important. In fact tube bending is required in many day to day items like automobiles, architectural fixtures, etc. In order to get a kink free and smooth finish of the bent tubing highly advanced bending machines are used. This is because getting a blemish free result by hand is not quite that easy.

Bending of steel tubing

As mentioned above, the bending of Aluminum Square Tubing is relatively easy, but suppose you need to bend stainless steel tubing into some particular shape it would require a lot of skill and expertise. Rectangular and square steel tubing is often used in construction of buildings to achieve durability and strength. The use of square and even round stainless steel tubing in construction of buildings has made it possible to express artistic and creative ideas in reality. Here again a lot of tube bending is required in order to create stunning and yet strong and durable results. This kind of tubing is widely used in the construction of domes and arches. The result of this innovation in building technology can be seen in the form or ever more beautiful buildings coming up all over the world.

Hence we can say that bending of aluminum square tubing and other round as well as square tubing is something that we cannot do without. It is one of the essential factors in modern life and the way we conduct things. You can find out a lot of details about tube bending and tube bending machinery on the internet. If however, you wish to take it up as a profession, it is a better idea to get some professional training and gain experience as an apprentice before setting out on your own.

Related reading: Stainless Steel Fabrication custom aluminum fabrication