About Stainless Steel Fabrication

23.07.15 / Stainless Steel Fabrication / Author:
Tags: , ,

Stainless Steel Fabrication technology refers to the performance of stainless steel with stainless steel were cutting, folding, bending, welding and other mechanical processing finally get the desired process of industrial production of stainless steel products, stainless steel processing in the process need to use a lot of

Machine tools, equipment, stainless steel processing equipment. Stainless steel processing equipment classified into cutting equipment and surface treatment equipment, cutting equipment is divided into Kaiping equipment and slitting equipment. In addition, the thickness of the stainless steel to points, there are hot and cold rolled processing equipment division. Thermal cutting equipment are plasma cutting, laser cutting, water cutting.

Original face: After NO.1 hot rolled, annealed and pickled surface. Generally used for cold rolled material, industrial tanks, chemical plant, etc., the thicker the 2.0MM-8.0MM.

Blunt surface: NO.2D cold rolling after heat treatment, pickling, its material is soft, silvery sheen surface for deep drawing process, such as automotive components, pipes and so on.

Matte: NO.2B cold rolling after heat treatment, pickling, and then to finish processing the surface of the light as a moderate person. Since the surface is smooth, easy to re-grind, make more bright surface, widely used, such as utensils, building materials. Using improve the mechanical properties of the surface treatment, meet almost all purposes.

NO.3 with a No. 100-120 grit abrasive belt grinding out product. It has better brightness with discontinuous coarse grain. For building exterior decoration materials, electrical appliances and kitchen equipment.

Sand: NO.4 with 150-180 grit abrasive belt grinding out product. It has better brightness with discontinuous coarse grain, thin stripes than NO.3. For baths, interior and exterior building materials, electrical appliances, kitchen equipment and food equipment.
# 320 with abrasive belt grinding out 320 products. It has better brightness with discontinuous coarse grain, thin stripes than NO.4. For baths, interior and exterior building materials, electrical appliances, kitchen equipment and food equipment.

Bristle surface HAIRLINE: HLNO.4 duly continuous grinding belt size polishing abrasive pattern generation product (subdivision number 150 to 320). Mainly used for architectural decoration, elevators, building door panels.

Bright side: BA impose bright annealed after cold rolling, and after formation of the resulting product. Excellent surface gloss, has a high reflectivity. As the surface of the mirror. For home appliances, mirrors, kitchen equipment, decorative materials.

Related reading: aluminum extrusion manufacturers Aluminum Solar Panel Frame

Comments: 0

« | »